| Image | Product | Actions |
|---|---|---|
|
SANY SSR160C-8 is a 16-ton single drum vibratory roller powered by a Cummins 132 kW engine, delivering 300/210 kN compaction force and 50% climbing ability for road, dam and earthwork compaction.
|
|
|
SANY SY135C 13.5-ton crawler excavator with Isuzu 4JJ1 86 kW National IV engine and 0.6 m³ bucket. Positive-flow hydraulic system, air-suspension seat, 10-inch touchscreen with rear camera, and EVI smart fleet management. Backed by SANY's "5231" global after-sales network across…
|
|
|
The SANY SY215C is a 21.9-tonne hydraulic crawler excavator powered by a 118 kW 4M50 high-pressure common rail engine. It delivers 138–148 kN bucket digging force and 103–107 kN arm force, with a maximum digging depth of 6600 mm and…
|
|
|
The SANY STG140C-8S is a 13-tonne motor grader built for heavy-duty grading, leveling, and slope work on road construction sites. Powered by a DONGFENG CUMMINS 6BTA5.9-C150 diesel engine (112 kW, 655 N·m torque) matched to a 6-forward/3-reverse powershift transmission, it…
|
|
|
The SANY SSR120C-10S single drum vibratory road roller delivers 12-tonne operating mass and 280kN maximum excitation force with 65% gradeability. Equipped with ISUZU Euro II engine, this C10S series roller achieves 10% higher compaction efficiency than competitors. Features high-frequency vibration,…
|
|
|
The SANY SY135C is a 14.87-tonne hydraulic crawler excavator built around an ISUZU 4JJ-FT4 turbo diesel delivering 78.5 kW (105 HP) at 2,000 rpm. A positive-flow hydraulic system with variable-capacity piston pumps (220 L/min) drives a 93 kN bucket digging…
|
|
|
The SANY STC250C4 truck crane delivers 25-tonne lifting capacity with a 35m full-extension boom. Powered by a 220kW WEICHAI engine with FAST 9-speed transmission. Features electro-hydraulic control, 360° slewing, and MachineLink T-AMS Pro telematics for fleet management. Suitable for construction,…
|
|
|
The SANY SW953K1 is a 5-tonne class wheel loader engineered for heavy-duty earthmoving, quarry, and construction site operations. With a 3.0 m³ standard bucket, 5,000 kg rated load capacity, and 14,400 kg operating weight, this machine delivers power and stability…
|
Below the SANY product listings above, here is a deeper breakdown of each SANY machine class we export — from China's #1 excavator range (1.6T–200T+) and mobile cranes (25T–1,600T) to concrete machinery, road rollers, motor graders, piling rigs, mining excavators, and port equipment. We also cover SANY's proprietary SYMC intelligent control system, hydraulic architecture, engine options, and how SANY compares against XCMG and ZOOMLION across the full construction machinery spectrum.
Excavators — 1.6T to 200T+, China's #1 for 14 Consecutive Years
Models: SY Mini (SY16–SY80, 1.6T–8T), SY Medium (SY135–SY335, 13.5T–33.5T), SY Large (SY365–SY550, 36T–55T), SY Mining (SY650–SY2000, 65T–200T+)
Hydraulic System: Kawasaki K3V/K5V or Rexroth A8VO axial piston pumps with SANY's proprietary electro-hydraulic positive flow control. Auto heavy-lift mode increases system pressure from 34.3MPa to 37.5MPa. Boom-arm-bucket regeneration circuit for fast cycle times without fuel penalty.
Engine: Isuzu 4JG1/4HK1 (mini), Cummins QSB/QSL (medium/large), Cummins QSM/QSK (mining class). Tier 3 / Stage IIIA to Tier 4 Final / Stage V compliance available. High-altitude turbo matching to 4,000m for Andes and Himalayan mining.
Undercarriage: X-frame carbody with reinforced track frame. Sealed and lubricated track (SALT) with induction-hardened links. Wide-track LGP option for soft ground (ground pressure below 30 kPa). Bolt-on sprocket rims for field replacement.
Best For: General construction excavation, trenching, quarry loading, mining overburden, demolition with breaker/shear, forestry harvesting.
Mobile Cranes — 25T to 1,600T, Truck, All-Terrain & Crawler
Models: STC Truck Cranes (25T–130T), SAC All-Terrain Cranes (60T–1,200T), SCC Crawler Cranes (55T–1,600T). SANY's 4,000T crawler crane (SCC40000A) is the world's largest capacity crawler crane — built for nuclear power plant and mega-petrochemical construction.
Boom Technology: Oval boom profile with 960 MPa steel on SAC/STC models. Single-cylinder pinning system with 5–7 telescoping sections. Super-lift mast and counterweight tray on SCC crawler models (260T+) for heavy lift configurations.
Control System: SANY SYMC (SANY Motion Controller) with CAN-bus integration. Touchscreen LMI with real-time load chart, outrigger pressure monitoring, and boom deflection compensation. Remote diagnostic module with 4G telematics for fleet management.
Best For: Infrastructure lifting, wind turbine erection (SCC 800T+ for 5MW+ turbines), petrochemical heavy lift, bridge and viaduct construction, port handling.
Concrete Machinery — Pumps, Mixers & Batching Plants
Models: Truck-mounted concrete pumps (SYG 28m–66m, 4–6 section Z-fold and RZ-fold booms), trailer pumps (HBT series, 40m³/h–90m³/h output), truck mixers (SY 6m³–14m³), batching plants (HZS 25m³/h–240m³/h)
Pump Technology: SANY's closed-loop hydraulic pumping circuit with S-valve (DN180/DN230). High-pressure pumping to 25 MPa concrete pressure. Reversible pumping for block clearance without disassembly. Stroke counter for remote fleet tracking of real production volume.
Mixer Drum Life: High-manganese wear plate (Hardox 450) with continuous spiral blade. 3–5 year drum life in high-abrasion aggregate conditions. Rear discharge chute with 270deg; hydraulic rotation.
Best For: High-rise building concrete pumping, dam mass concrete placement, tunnel lining, pre-cast yard batching, ready-mix fleet expansion.
Road Machinery — Rollers, Graders, Pavers & Milling Machines
Models: Single-drum rollers (SSR 8T–26T), tandem drum (STR 1.5T–14T), pneumatic-tyred (SPR 16T–30T), motor graders (SMG 165HP–280HP), asphalt pavers (SAP 2.5m–9m width), cold milling machines (SCM 0.5m–2m width)
Roller Tech: Dual-frequency (28/35Hz), dual-amplitude (1.0/1.9mm). Hydrostatic drive on drum and wheels. Compaction meter with real-time EVIB modulus display for intelligent pass-count optimization.
Grader Features: 3.7m–4.3m moldboard, 360deg; continuous rotation, full-hydraulic side-shift. Articulating frame (25deg;). Tandem drive with No-SPIN differential and hydraulic blade float.
Best For: Highway construction, dam earthwork, airport runway paving, asphalt resurfacing, mine haul-road maintenance.
Piling Rigs — Rotary Drilling Rigs, 100kNm–460kNm Torque
Models: SR155 (150kNm), SR235 (235kNm), SR285 (285kNm), SR360 (360kNm), SR445 (445kNm), SR485 (485kNm)
Drilling Config: Kelly bar (interlocking or friction type, 1–5 sections, depth to 100m) or CFA continuous flight auger. Pile diameter 600mm–2,500mm. Max depth 100m on SR445+ with interlocking bar.
Power System: Cummins QSM/QSK engine with load-sensing hydraulic system. Variable-displacement main pump with priority valve for simultaneous crowd, rotation, and winch operation. Pressurized operator cab with ROPS/FOPS.
Best For: Bridge foundation bored piles, high-rise building foundations, metro station diaphragm walls, port jetty piling, wind turbine foundation drilling.
Mining Machinery — Large Excavators & Rigid Dump Trucks
Models: Mining excavators SY650–SY2000 (65T–200T+, 3.2m³–12m³ rock bucket), Rigid dump trucks SKT90S/SKT105 (60T–105T payload)
Structure: Heavy-duty box-section boom and arm with internal baffle plates, full-penetration welds, and 10mm+ plate thickness in wear zones. Heavy-duty carbody with reinforced swing bearing. Designed for 60,000+ hour structural life in continuous mining operation.
Engine: Cummins QSK19/QSK23 (up to 800HP) with dual-stage desert-grade air filters and cyclonic pre-cleaners. High-capacity cooling package rated for 55deg;C ambient. 500L–800L diesel tank for 24-hour continuous operation.
Best For: Open-pit coal and iron-ore mining, copper and gold pit operations, large quarry production, dam mega-earthmoving.
Port Machinery, Aerial Platforms & Wind Energy
Port Machinery: Reach stackers (45T, 3-high 9'6" container stacking), empty container handlers (7-high), heavy forklifts (10T–46T). Hydrostatic drive with CAN-bus load sensing. Designed for 24/7 terminal operation.
Aerial Work Platforms: Scissor lifts (6m–14m), telescopic boom (18m–58m), articulating boom (16m–44m). Electric and diesel options. CE, ANSI, AS certified.
Wind Energy: Specialized crawler cranes (SCC 800T–1,600T) with wind power boom configuration for 5MW–15MW turbine installation. Main boom 90m–120m + jib, super-lift mast, and enhanced counterweight system.
Best For: Container terminal and port handling, industrial maintenance, warehouse logistics, wind farm construction, high-rise building facade access.
SANY vs XCMG vs ZOOMLION — How To Choose Among China's Big Three
SANY Core Technology — What Makes China's #1 Excavator Brand
SANY's proprietary SYMC (SANY Motion Controller) is a CAN-bus-integrated control platform linking engine ECU, hydraulic pump controllers, valve block solenoids, GPS/4G telematics module, and operator interface into a single real-time network. Features: Auto idle shutdown (30s/60s/120s), heavy-lift mode (37.5MPa boost), attachment flow memory for up to 10 hydraulic tools, ECO mode with 10–15% fuel saving, and remote fleet management with geo-fencing, utilization reports, and maintenance scheduling via SANY Cloud.
SANY pairs world-class hydraulic components (Kawasaki K3V/K5V pumps, Kawasaki KMX/K7V main valves, Rexroth A8VO/A11VO pumps) with its own SYMC electro-hydraulic control for optimised performance. Positive flow control eliminates parasitic pump output during neutral lever position. Boom-arm-bucket regeneration recovers return-flow energy for faster cycle times without increasing engine rpm. Spool stroke sensors on every section for real-time pilot pressure mapping and predictive maintenance.
SANY offers Isuzu (mini excavators — compact, reliable), Cummins QSB/QSL/QSM/QSK (mainstream excavators and cranes — global parts availability, Tier 4 Final / Euro V), Weichai WP (cost-optimised alternative), and Deutz (European market compliance) engines. Customers select the engine at order stage. Full emission certification documentation provided per engine serial number. High-altitude turbo matching to 4,000m on Cumins-powered models.
SANY builds excavators on an X-frame carbody with full box-section track frames. Reinforced boom with internal baffle plates and cast steel boom foot. Boom and arm undergo 100% ultrasonic inspection on all structural welds. Greased-and-sealed track adjuster with hydraulic tensioning — critical for high-wear mining and quarry applications. Structural components designed for 40,000+ hours (medium class) and 60,000+ hours (mining class) in continuous operation using finite element analysis validated by strain gauge testing.
SANY's concrete pumps use a closed-loop hydraulic circuit with proportional S-valve (DN180/DN230). High-pressure pumping to 25 MPa concrete pressure — enabling vertical pumping to 500m+ for super-tall buildings. Reversible pumping function clears blockages without disassembly. Boom sections with 960 MPa steel and 4–6 section RZ-fold or Z-fold articulation. Automatic lubrication system with progressive distributor blocks for all concrete-contact wear points.
SANY crawler cranes use lattice-boom construction with pin-connected chord and lacing members for rapid field assembly. Super-lift mast and counterweight tray (hanging or sled type) on models 260T+ for heavy-lift mode. Slew ring with triple-row roller bearing for 360deg; continuous rotation. Dual-drum winch (main and auxiliary) with free-fall on auxiliary hook for dynamic compaction operation. Wind power configuration with 90m–120m main boom + fixed jib — purpose-engineered for 5MW–15MW wind turbine erection.
Why Source Your SANY Machines Through ArcherMach
- Factory-Direct SANY Pricing — As an authorized SANY export partner, we quote direct-from-SANY-factory prices with no intermediate layers. Machine, attachments, spare parts, and freight are itemized transparently on one quotation.
- Custom Specification at Order Stage — Choose engine brand (Isuzu / Cummins / Weichai / Deutz), emission level (Tier 3 / Tier 4 / Euro V), bucket type and capacity, track shoe width (standard / LGP), attachment hydraulic circuit, counterweight package, and any special factory options.
- Pre-Delivery Inspection & Test — Full factory PDI: engine dyno, hydraulic pressure test, cylinder cycle timing, pump flow calibration, electrical system check, SYMC diagnostic scan, and functional test. Crane load test with LMI calibration at 110% SWL. Your specific machine tested and photographed.
- Genuine SANY Parts Coverage — Full SANY genuine parts: engine service kits (Isuzu, Cummins, Weichai, Deutz), hydraulic pump and motor seal kits, S-valve wear plates and cutting rings (concrete pumps), track chains and sprocket rims, bucket teeth and GET, cab glass and body panels. All in stock on archerparts.com.
- Global Certification Support — CE (EU machinery directive), EPA Tier 4 Final, GOST-R (CIS), SASO (Saudi Arabia). COC, Certificate of Origin (Form E / Form F / Form A), engine emission certificate, and SYMC diagnostic report provided with shipment. Zero customs clearance delays.
- Global DDP Delivery + Commissioning — SANY machines shipped via RoRo, flat-rack, or open-top container. Crane shipment with factory transport frames and boom dollies. We manage export clearance, ocean freight, import customs, duties, and final delivery. Optional SANY-certified commissioning engineer for assembly, calibration, and operator training on-site.
Key Markets & How to Order
Africa (Nigeria, Kenya, Tanzania, South Africa, Ghana, Ethiopia, Egypt, Zambia, DRC, Angola, Uganda, Mozambique) · Middle East (Saudi Arabia, UAE, Iraq, Qatar, Kuwait, Oman, Jordan, Bahrain) · Southeast Asia (Indonesia, Philippines, Vietnam, Thailand, Malaysia, Myanmar, Cambodia) · South America (Brazil, Peru, Chile, Colombia, Argentina, Ecuador, Bolivia) · CIS & Central Asia (Russia, Kazakhstan, Uzbekistan, Tajikistan)
Ready to order? Tell us your required SANY machine type (excavator / crane / concrete pump / roller / grader / piling rig / mining), model, engine brand preference (Isuzu / Cummins / Weichai / Deutz), emission level, attachment configuration, and destination port. We return a complete FOB / CIF / DDP quotation with full machine specification, delivery timeline, spare parts recommendation, and shipping options within 24 hours. Contact ArcherMach — your direct factory channel for China's #1 excavator and concrete machinery manufacturer.