XCMG Top Brand Lifting Mobile Crane XCR90 90 ton Rough Terrain Crane For Sale
XCR90 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc. 1.Superb lifting performance * 5-section boom of 48m. * Two jib sections of 9.2m-16m , with 0°, 15° and 30° jib offset angles. * Three boom telescoping modes, wider working radius and better application adaptability. 2. High performance * 5-section boom of 48 m is the longest in the industry, the length of boom and jib can reach 61 m after jib is installed. * Large displacement dual-variable plunger pump with confluent main valve adopting XCMG patented technology integrated, leads to improvement by 13% in operation efficiency. * Large power engine + low speed large torque transmission system with hydraulic torque converter; acceleration performance is improved by 10%, the max. travel speed is 40 km/h and the max. grade ability is 70%. 3. Green and energy-saving * New energy-saving hydraulic system with double-variable pump combined with a valve-controlled load-sensing system. The fuel consumption under different working conditions can be reduced by 10%~15%. * ECO energy-saving control, fuel consumption under different working conditions can be reduced by 5%-9%. * Torque converter with lockup function, low speed large torque, high speed and high efficiency, and driving fuel consumption is reduced by 20%. 4.Science and technology intelligence * Dedicated driving safety active protection technology is adopted to realize classified management, such as automatic warning,gear and speed limit, automatic brake according to different fault categories, in order to improve the active safety of the driving vehicle. * Intelligent boom system can standardize the operation of the users and improve the operation safety; it provides users with the most effective lifting plan, and improves the working efficiency. * Fault self-diagnosis system is adopted; there are 285 control nodes; automatic inspection and automatic diagnosis can be shown in real-time on the display.
Dimension | Unit | XCR90 |
Overall length | mm | 14468 |
Overall width | mm | 3280 |
Overall height | mm | 3898 |
Weight | ||
Total weight in travel | kg | 53498/54998 |
Front axle load | kg | 28723/27530 |
Rear axle load | kg | 24775/27468 |
Power | ||
Engine model | SC9DK260.1G3/QSB6.7-C260-30 | |
Engine rated power | kW/(r/min) | 192/2000、194/2200 |
Engine rated torque | N.m/(r/min) | 1100/(1200-1600)、900/1500 |
Travel | ||
Max. travel speed | km/h | ≥34.8 |
Min. turning diameter | m | ≤13 |
Min. ground clearance | mm | 550 |
Approach angle | ° | 24 |
Departure angle | ° | 24 |
Max. grade ability | % | ≥62 |
Main performance | ||
Max. rated total lifting capacity | t | 90 |
Min. rated working radius | m | 2.5 |
Turning radius at turntable tail | m | 4.544 |
Max. lifting torque | kN.m | 2840 |
Base boom | m | 13 |
Fully extended boom | m | 48 |
Fully extended boom+ jib | m | 63.1 |
Longitudinal outrigger span | m | 5.91 |
Lateral outrigger span | m | 7.8 |
Working speed | ||
Boom luffing time | s | ≤55 |
Boom full extension time | s | ≤110 |
Max. swing speed | r/min | ≥2.0 |
